Quick answer: yes, you need a heat protectant every time you use a hairdryer, straighteners or curling tongs. Apply it to damp, towel-dried hair before you blow-dry and style, and keep your tools at the lowest temperature that works for your hair: around 150 to 180°C for fine or damaged hair, and up to 200 to 230°C only for thick, coarse hair. A heat protection spray such as Insight's Heat Protection Shield suits fine and normal hair; for dry, thick, frizzy or curly hair, use a serum such as Replenishing Thermal Care Serum, which protects up to 230°C.
Heat styling is one of the biggest causes of dry, brittle hair and split ends. A good heat protectant (sometimes called a heat defence spray) won't make hair heat-proof, but it does put a buffer between your hair and the heat, so you get the style without as much of the damage. Here's how it works, what the testing shows and how to use it properly.
"The biggest heat-styling mistake I see is not using a heat or thermal protection product at all. Even in salons, some stylists blow-dry hair without anything. Know your styling products and what they do: protection affects how long your style lasts, your colour, toner and gloss, and most importantly the health of your hair."
Lorraine Matic, Head of Insight UK Education
What does heat protectant do?
Hot tools pull moisture out of the hair and can lift and crack the cuticle, the protective outer layer of each strand. A heat protectant coats the hair in a thin film that slows down how quickly heat reaches the strand and helps hold moisture in. Many also smooth the cuticle, which is why hair looks shinier and less frizzy afterwards.
Does heat protectant really work? What testing shows
It reduces damage; it doesn't eliminate it. Here's what we found when Replenishing Thermal Care Serum was tested under real heat:
- The heat test: hair treated with the Rebuild routine (Replenishing Shampoo, Replenishing Conditioner and Thermal Care Serum) was put through 4 rounds of 20 passes with a straightener at 230°C. Treated hair showed a higher protein denaturation temperature than untreated hair, which indicates a stronger internal structure and confirms the protective effect against heat damage.
- The breakage test: in a separate cyclic fatigue test on bleached hair, the same routine helped hair withstand more breakage cycles than untreated hair.
The biggest difference still comes from combining a heat protectant with lower temperatures and fewer passes.
Heat protectant spray vs serum vs cream: which is best?
| Spray | Serum | Cream | |
|---|---|---|---|
| Weight | Lightest | Light to medium | Richest |
| Best for | Fine, normal or oily hair; daily use | Dry, frizzy, coloured, damaged, thick or curly hair | Very thick, coarse or curly hair |
| Extra benefit | Easy, even coverage with no weight | Smoothing, moisture and shine | Moisture and frizz control |
| Watch out for | May not be enough moisture for very dry hair | Use sparingly on fine hair | Can weigh hair down |
| Insight pick | Heat Protection Shield | Replenishing Thermal Care Serum: the moisture of a cream with less weight | |
- Heat protectant spray: the lightest option and the easiest to apply evenly. Best for fine hair and anyone who hates feeling product in their hair. Heat Protection Shield is a lightweight heat protectant spray for all hair types.
- Heat protection serum: adds smoothing, moisture and shine as well as protection, so it suits dry, frizzy, damaged, thick or curly hair. Replenishing Thermal Care Serum protects up to 230°C and leaves a glossy, glass-hair finish. Protection lasts until your next wash, so there's no need to reapply before each heat tool.
- Heat protectant cream: the richest option, traditionally used on thick, coarse or curly hair. If that's your hair type, Thermal Care Serum gives you the moisture and frizz control without the heaviness, and works a little at a time so you can build it up on thicker lengths.
- Hair oil as heat protectant: some oils add a layer of protection, but most aren't designed for direct heat. If you love oil, use a dedicated heat protectant first and add a drop of oil to the ends afterwards, or choose a product designed for both.
How to use heat protectant spray
- Towel-dry hair after washing until it's damp, not dripping.
- Spray Heat Protection Shield evenly from roots to ends, section by section.
- Comb through so every strand is covered.
- Blow-dry, then finish with straighteners or curling tongs if you're using them. Make sure hair is completely dry before any straighteners touch it.
Applying protection on damp hair means it's already in place for every heat step that follows, from the hairdryer to the final pass of the straighteners. Always check the instructions on your product, as some heat protectants are designed for dry hair instead.
Lorraine Matic, Head of Insight UK Education, likes to mix Thermal Care Serum with Oil Non Oil before a blow-dry for protection and shine.
Heat protectant for straightening
Straighteners put direct heat on the hair, so they're the tool that needs protection most. Apply your protectant to damp hair, blow-dry completely, then straighten in small sections with one slow pass rather than several quick ones. Never straighten damp hair: the water inside the strand heats up and can damage it.
What temperature should my straighteners be?
As a general guide, use the lowest heat that gets the job done:
- Fine, thin, bleached or damaged hair: 150 to 180°C.
- Normal, medium-thickness hair: 180 to 200°C.
- Thick, coarse or very curly hair: up to 200 to 230°C, and only if lower settings don't work.
Go slowly with one pass at a lower heat rather than several passes at a high heat, and never go above the temperature your heat protectant is designed for.
The best heat protectant for your hair type
Fine hair: choose a lightweight spray that won't flatten roots. Heat Protection Shield is light enough for fine hair and daily use. Pair it with our tips on volume for fine hair.
Dry or damaged hair: a serum gives more smoothing and moisture. Thermal Care Serum is part of the Rebuild range, designed for weakened, heat-styled hair.
Bleached hair: lightened hair is especially vulnerable to heat, so keep tools at the lower end and protect every time. See our guide to caring for bleached hair.
Thick or coarse hair: use Thermal Care Serum in place of a cream, building up a little at a time through the lengths until every section is covered.
Curly and wavy hair: if you diffuse or occasionally straighten, use a heat protectant every time, because curls lose their pattern when heat damages them. A serum adds moisture as it protects. See our curly hair oil guide for finishing tips.
Coloured or blonde hair: heat fades colour and turns blondes brassy faster, so heat protection matters even more. Read our tips to make hair colour last.
Frequently asked questions
What's the best heat protectant spray?
One that suits your hair type and the heat you use. For fine and normal hair, a lightweight spray like Heat Protection Shield; for dry, damaged or thick hair, Replenishing Thermal Care Serum, tested at 230°C.
Is heat protectant spray or cream better?
It depends on your hair. Sprays are lighter and suit fine or normal hair. Creams are richer and suit thick, coarse or curly hair, but can weigh it down. A serum like Replenishing Thermal Care Serum sits in between: the moisture and frizz control of a cream with a lighter feel.
Does heat protectant really work?
It reduces damage but doesn't eliminate it. In testing, hair treated with the Rebuild routine including Thermal Care Serum showed a stronger internal structure after repeated straightening at 230°C than untreated hair. Lower temperatures and fewer passes matter too.
Should heat protectant go on wet or dry hair?
It depends on the product. Heat Protection Shield and Thermal Care Serum are both applied to damp hair before you blow-dry and style. Some heat protectants are made for dry hair, so always follow the label.
Do I need heat protectant for a hairdryer?
Yes. Hairdryers can reach high temperatures, and blow-drying is the heat styling most people do most often.
Do I need to reapply before straightening?
Not with Thermal Care Serum: protection lasts until your next wash. For other products, check the label.
Can I use heat protectant every day?
Yes, a lightweight formula is designed for daily use. Wash regularly to avoid build-up.
Should I put heat protectant on before or after leave-in conditioner?
Apply leave-in first, then heat protectant as the last step before heat, so it sits on the surface where the heat hits. See our leave-in conditioner guide.
Shop Insight's vegan heat protection range, made in Italy.
About the author
Charlotte Read has spent six years in the hair industry with Insight Professional and holds a First Class BSc in Business Management and Marketing. She writes with reference to real salons across social media and the wider Insight community, and draws on the Insight office team, who between them bring over 100 years of combined experience on salon floors.
Where technical expertise is needed, Charlotte consults Lorraine Matic, Head of Insight UK Education, who brings over 38 years of global experience in colour, technique and hair science.
